AlexProService
Washing machine won't spin — what to do
Back to blog
Faults9 min10 July 2026

Washing machine won't spin — what to do

Laundry comes out soaking wet, the drum turns slowly or stops — the washer won't spin. Samsung and LG often show UE / UB / E4 (imbalance), but the cause may be the belt, motor, drain or bearings.

Washing machine repair — from 150,000 UZS, visit usually within 1 hour, free diagnostics with repair. +998 99 411 47 57, @Aleks_Pro_servis.

Summary

The essentials in a minute

Check load balance first — one heavy item often triggers UE
Weak spin can mean belt, motor brushes or partial drain clog
Squeal and drum play point to worn bearings

In detail

01

How the problem shows up

Clothes stay too wet after the cycle. The drum spins slowly or stops during spin. The machine jumps, hums, but won't ramp up.

Display shows UE, UB, E4 or no code but dead spin. Sometimes it tries, drains and stops.

02

Cause 1: unbalanced load

One blanket, rug or pair of jeans throws balance off — electronics cut RPM or abort spin. UE on Samsung/LG is classic.

Fix: redistribute laundry, add 1–2 towels, don't fill to 100%. Run spin only.

If UE appears on every load — it's mechanical or the Hall sensor, not balance.

03

Cause 2: belt, brushes and motor

A loose or broken belt — no speed. Worn carbon brushes — weak spin and sparking.

Belt replacement — from ~150,000 UZS, brushes — from ~150,000 UZS. LG Direct Drive has no belt — we test the module and Hall sensor.

04

Cause 3: drain and bearings

The machine won't spin until water is gone. A partial pump clog feels like «won't spin».

Worn drum bearings — rumble, play, weak spin. Major job from ~350,000 UZS but cheaper than a new washer.

Don't ignore squealing — it destroys the seal and tub.

05

Cause 4: electronics and sensors

The control board may not command high RPM. A faulty Hall sensor — the machine «doesn't see» drum rotation.

A bad pressure switch also blocks spin. On-site diagnosis in 20–30 minutes.

Sensor or module — from 150,000–400,000 UZS.

06

Repair at AlexProService

We check load, drain, belt, motor, bearings, errors, sensors. Price agreed before work.

8:00–22:00, usually within 1 hour. Washing machine repair.

Takeaway

Conclusion

Start with load balance, but repeated UE or squealing needs a technician. AlexProService restores spin from 150,000 UZS, within 1 hour. +998 99 411 47 57. Washing machine repair.

FAQ

Frequently asked questions

01Is Samsung UE always imbalance?+

Often yes, but if it happens on every load — check shocks, bearings, Hall sensor and board.

02Can I spin manually by turning the drum?+

No — it won't help and may damage the drive. Motor diagnostics needed.

03Belt replacement cost?+

From about 150,000 UZS with labor.

04Machine jumps during spin — dangerous?+

Yes — level the feet and balance the load. Constant jumping kills shocks and bearings.

ЗвонокTelegramChannelInsta